Document Number: PD196‐220R5
PDI‐P14W
Page 20 of 23
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1‐800‐628‐9870 FX 937‐743‐5664
Diagnostics
This menu provides readouts of the TV’s internal operation. The Diagnostics menu items are read‐only and cannot
be changed.
1.
Enter the Features menu
2.
Press CH
▲
or CH
▼
to highlight
Diagnostics
.
3.
Press VOL
►
to select it.
4.
Press the SETUP button to return to the previous menu.
To exit, press SETUP until the programming menus
disappear.
Field ON Hours:
Cumulative time TV is
actually on.
Field Powered Hours:
Cumulative time TV is powered.
Firmware VSN
0.64
Micom VSN
0.4
Power On Cause
Normal
Channel
up
Power
Off
This feature causes the TV to turn off once it reaches the highest numbered (last) channel and is usually used with
single button style pillow speakers. When the feature is disabled, the TV will continue on to the lowest channel and
not turn off.
1.
Enter the
Features
menu
2.
Press CH
▲
or CH
▼
to highlight
Channel
Up
Power
Off
.
3.
Press VOL
◄
or VOL
►
to select
Enabled
or
Disabled
.
4.
Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.
Channel
to
Other
Source
External signal sources connected to the TV, such as DVD players or video‐game systems, are shown in the current
channel lineup after the highest channel and then shown on the TV. Set this feature to Disabled to require the
activation of the external sources by pressing the remote’s or the TV’s TV/AV button. Set this feature to Enabled to
allow access to external devices by pressing channel up or down buttons on a remote or most pillow speakers.
1.
Enter the
Feature
s menu
2.
Press CH
▲
or CH
▼
to highlight
Channel
to
Other
Source
.
3.
Press VOL
◄
or VOL
►
to select
Enabled
or
Disabled
.
4.
Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.
Power
on
ARC
Mode
The TV powers on with a set screen sized aspect ratio of 4:3, 14:9, 16:9, 16:9 Panorama, or Last.
1.
Enter the Features menu
2.
Press CH
▲
or CH
▼
to highlight Power On ARC Mode.
3.
Press VOL
►
to select 4:3, 14:9, 16:9, 16:9 Panorama, or Last.
4.
Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.
Standby
Power
Controls power used by TV when in “Standby” or OFF stage.
1.
Press the SETUP button on the remote control.
2.
Press CH
▲
or CH
▼
to select
Features
.
3.
Press VOL
◄
or VOL
►
to select it.
4.
Press CH
▲
or CH
▼
to select
Standby
Power
. Press
5.
VOL
◄
or
►
to select Low/Normal.
Note
:
If
in
“low”
mode,
TV
consumes
less
power
but
takes
longer
to
start
when
turned
back
on.
6.
Press the SETUP button to return to the previous menu. To exit, press SETUP until the programming menus
disappear.
