PDi PDI-P14W, Руководство пользователя

Страница: 23 / 24

Document Number: PD196‐220R5 PDI‐P14W Page 22 of 23
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1‐800‐628‐9870 FX 937‐743‐5664
CLONING
Cloning allows quick programming of a TV from a USB Flash Drive. The operation involves first downloading setup
information from a programmed host TV to an USB Flash Drive and then uploading the setup information to
another TV. Cloning can also be used to re‐program a programmed TV.
Save Settings to USB
1. Turn on the TV
2. Insert a blank USB thumb drive into the cloning port. A Cloning Main Menu will appear on the TV screen.
3. Press CH
▲
or CH
▼
to highlight Save Settings to USB .
4. Press VOL
►
to display the Save Settings to USB menu.
Restore Setting to TV
1. Press SETUP on the programming remote, PD108‐420.
2. From the SETUP menu, press CH ▲ or CH ▼ to highlight
Cloning .
3. Press VOL
►
to select it.
4. Cloning menu will appear
5. Follow prompts on Cloning menu. Cloning Main Menu will
appear after approximately 15 seconds.
6. Press CH ▲ or CH ▼ to highlight Restore Settings to TV .
7. Press VOL
►
to display a list of previously stored TV
setups on the USB Disk.
8. Press CH
▲
or CH
▼
to highlight the file for the P14.
9. Press VOL
►
to select it. (The TV will shut off and turn
back on automatically; this takes about 15 seconds).
10. Press VOL
►
to restore the settings to the TV. (Screen will
turn black and LCD light will flash red during this process. Once process is complete LED light will change
to blue and TV will return to the Cloning Main Menu with verification of “Successful cloning”.)
Firmware
The firmware for the model PDI‐P14W is field upgradeable, but normally does not require this process and should
be performed by the hospital technician. A special data file is required from the PDi factory to complete this
process. The file is posted on PDi Communication’s web site:
http://www.pdiarm.com . Firmware files are written
to the root directory of a blank USB Flash Drive, connected to the TV’s Cloning port and updated using the TV’s
menus. Once complete, the TV settings must be reprogrammed.