Document Number: PD196‐220R5
PDI‐P14W
Page 13 of 23
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1‐800‐628‐9870 FX 937‐743‐5664
Add
/
Delete
Channels
Individual analog TV channels that are missing can be manually added to a Service Level. Or, analog TV channels
that require deletion can be manually removed from a Service Level. Digital channels found during Auto
Programming can be enabled or disabled in each service level.
1.
From the Channels menu, press the CH
▲
/ CH
▼
to select
Add/Delete
Channels
. Press VOL
◄
/ VOL
►
to
select.
2.
Press CH
▲
/ CH
▼
to select the service level you wish to add or delete channels.
3.
Press VOL
◄
/ VOL
►
to enter the Add/Delete Channels menu for that service level.
4.
Press CH
▲
/ CH
▼
to select Analog Channel
5.
Press VOL
◄
/ VOL
►
to scroll through every available channel. The channel number changes to indicate
the current channel viewed.
6.
Press CH
▲
/ CH
▼
to select Add/Delete Analog Channel.
7.
Press VOL
◄
/ VOL
►
to alternately Add or Delete the current Analog Channel from the Service Level.
8.
Press CH
▲
/ CH
▼
to select Enable/Disable Digital Channel.
9.
A listing of all digital channels found during Auto Programming will be displayed.
NOTE
:
If
the
Enable/Disable
Digital
Channels
states
“no
Channels”,
either
the
TV
did
not
locate
any
channels
during
Auto
Programming
or
the
Mode
was
set
to
“Analog
Only”
during
Auto
Programming.
10.
Press CH
▲
/ CH
▼
to select a Digital Channel.
11.
Press VOL
◄
/ VOL
►
to alternately Enable or Disable the current Digital Chanel from the Service Level.
12.
Press SETUP to return to the previous menus.
Clear
Service
Level
This empties a service level of all its programmed channels, leaving
it blank.
1.
From the Channels menu, press the CH
▲
/ CH
▼
to highlight
Clear
Service
Level
.
2.
Press VOL
►
to select.
3.
Press CH
▲
/ CH
▼
to highlight the Service Level (
Free,
Basic,
or
Premium
).
4.
Press VOL
►
to select the highlighted service level.
5.
A confirmation page will appear. Press Yes
▲
to proceed.
Press
▼
or SETUP to return to the previous menu.
NOTE:
After
a
Service
Level
is
cleared,
the
TV
returns
to
the
Clear
Service
Level
menu.
“Blank”
will
appear
to
the
right
of
the
Service
Level.
6.
Press SETUP to return to the previous menu. To exit, press
SETUP until the programming menus disappear.
