PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Document No: PD196-377R1
PDI-P14T2S LCD HDTV with Android
Page 9 of 59
Color Temperature
The color temperature menu adjusts the color balance of the picture.
“Standard”, “Reddish”, “Greenish”, “Bluish” color temperatures are
available for selection; however the individual colors are not adjustable.
The “USER” setting allows individual adjustment of each of the TV’s
primary colors. The color temperature setting is best set using a
calibrated signal source capable of generating a test signal containing
both pure white and pure black picture components.
1. Enter the Picture menu
2. Press
CH▲ / CH▼ to highlight Color Temperature.
3. Press VO
L► to enter it.
4. Press
CH▲ / CH▼ to see the individual settings.
5. On User, press VOL
◄ / VOL► to highlight R,G, or B or to get
out of the customized adjustments.
6. Press
CH▲ / CH▼ to adjust R,G, or B
Note: When you select one of the three colors to adjust, the
other two will turn gray.
7. Press SETUP to return to the previous menu. To exit, press
SETUP until the programming menus disappear.
Noise Reduction
Additional picture improvement may be achieved by enabling the Noise
Reduction function found in the Picture menu.
1. Press the SETUP button to display the SETUP MODE menu.
2. Select the Picture menu item.
3. Press the CH
▲ / CH▼ buttons to highlight the Noise Reduction.
4. Use the VOL
◄
/ VOL
►
buttons to alternate, Enable or Disable.
5. Press the SETUP button to return to the previous menu.
Sound
The Sound menu allows precise adjustment of several parameters.
1. Press the SETUP button to display the SETUP MODE menu.
2. Press the CH
▲ / CH▼ buttons to highlight the Sound menu item.
3. Use the VOL
◄
/ VOL
►
to display the Sound Menu.
Balance
This will adjust the volume balance of the left and right speakers.
1. In Sound menu, press the
CH▲ / CH▼ to select Balance.
2. Press the VO
L◄ / VOL► to select desired speaker balance from
L50 – R50 with 0 being equal balance.
3. Press SETUP to return to the preceding menu.
Minimum Volume
Sets the minimum volume level the TV can reach. Setting this to any
value other than 0 guarantees that some level of sound will always be
heard when the TV is operating.
4. In Sound menu, press the
CH▲ / CH▼ to select
Minimum
Volume
.
5. Press the VO
L◄ / VOL► to select your preferred minimum
volume.
6. Press SETUP to return to the preceding menu.
