PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Document No: PD196-377R1
PDI-P14T2S LCD HDTV with Android
Page 12 of 59
Signal
1. Press the SETUP button on the remote control.
2. Press
CH▲ or CH▼ to highlight Channels.
3. Press VO
L► to enter the Channels sub-menu.
4. Four different tuning types are available depending upon the healthcare facility’s signal type. Selection of the
correct signal type is required for the TV to recognize all possible channels and before any channel programming
can begin.
5. Enter the Channels menu
6. Press
CH▲ or CH▼ to highlight Signal.
7. Press VOL
► to select Air, Cable STD, Cable IRC, or Cable HRC.
Note: Most hospitals use the Cable STD signal style.
Auto Program
The TV automatically scans each available channel for activity. Channels that display activity are memorized into the
selected Service Level.
Analog Only:
TV searches for analog channels only.
Digital Only:
TV searches for digital channels only.
Analog and Digital:
TV searches for both analog and digital channels.
Interleave A+D:
In the order of channel number regardless of the system.
All A then D:
Digital channels are displayed after all analog channels.
1. From the Channels menu, select Auto Program
2. In the Auto Program menu, press the VO
L► button to select Mode.
3. Press VO
L► to set the scope of channel scanning.
4. Press the C
H▼ button to select the Channel Sequence menu item.
5. Press
◄VOL► to set the Channel Sequence in which the channels are displayed after searching.
6.
Press the C
H▲ CH ▼ button to select the Service Level you wish to program. The menu displays the current
programming status of each level as either Programmed or Blank. Press the VO
L► to choose the service level.
Note: A Programmed service level can also be reprogrammed if desired.
7. A confirmation menu will appear before proceeding. Press Yes
▲ to select YES and start auto programming. The
TV will now search all available channels with an on-screen progress percentage displayed. Once complete,
press the SETUP button to return to normal TV viewing.
Note: Any tuning mode that includes Digital channels will require several minutes to complete the auto
programming.