PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Document No: PD196-377R1
PDI-P14T2S LCD HDTV with Android
Page 8 of 59
Programming Menus and Setup
Note: A programming remote control is required to perform all setup operations for the television. The programming
remote (Part Number PD108-420) is NOT packaged with the TV and must be ordered separately. The following
instructions assume you have a programming remote, have correctly mounted the TV, and connected a coax cable that
provides both power and RF signal.
Service Level
This TV offers a disable and three different programmable Service Levels: Free, Basic, and Premium. Only one Service
Level is usable at a time.
Disabled
is like a mechanical key lock – when in
Disabled
service level, the TV can be turned OFF and ON, but cannot
be used for viewing. A standard message appears on a black screen.
Free
lets patients watch hospital education and information
channels without renting the TV. The channels containing
programming for no charge are typically programmed into this
level of service. This is the factory default setting for service
level.
Basic
service typically allows additional channels beyond
those offered in the FREE level.
Premium
is the highest Service Level with typically the
most channels available for viewing.
Press the SETUP button to display the SETUP MODE menu.
Press the VO
L► to disable or select desired service level.
(Free, Basic, Premium)
Picture
Adjustment of picture Brightness, Contrast, Color, Tint, Color Temperature and Sharpness is available to customize the
levels you prefer using the on-screen menus.
Brightness, Contrast, Color, Tint, and Sharpness
These settings have a range of 1-100. To change one of them, simply change the number by following this process.
Press the SETUP button to display the SETUP MODE
menu. Select the Picture menu item.
1. Press the CH
▲ / CH▼ buttons to highlight the desired picture item – Brightness, Contrast, Color, Color
Temperature, Sharpness, and Noise Reduction.
2. Adjust the picture item using the VOL
◄ / VOL► buttons to the desired level.
3. Press the SETUP button to store the picture values.
