Communication
Systems Inc.
PDI-DVD-SA Player
Installation Guide
Page 7 of 26
Better Solutions Are Within Reach™
INSTALLATION and OPERATING INSTRUCTIONS
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 FX +1-937-743-5664
Document Number:
PD196-058R4
Included in box
DVD player
Power cord
Manual IR
sensor
Remote
control
Composite
Video
cable
Connecting to a TV
The DVD player can be connected to a TV with a digital HDMI connection or one of three analog connections. It is
designed to be mounted vertically, but it can also be mounted horizontally.
1.
Connect this unit to your TV via the Composite Video, S-Video,
YUV(YPbPr), or HDMI output jacks.
(
See Rear Panel on page 8
)
2.
Connect the DVD player power cord to the DVD and to the wall
outlet.
3.
Power on the DVD player and TV.
4.
Be sure the TV is set up for the type of source you connected to it.
(*
Review your TV manual.
)
Connecting Notes
•
Be sure that DVD player, TV, and other
equipment are turned off before connecting.
•
Observe the color-coding when connecting audio
and video cables
•
If you are using an S-Video connection, you will
also need to connect audio cable to the L&R
jacks on the DVD player and on the TV.
•
HDMI does not require a separate audio
connection
