Communication
Systems Inc.
PDI-DVD-SA Player
Installation Guide
Page 12 of 26
Better Solutions Are Within Reach™
INSTALLATION and OPERATING INSTRUCTIONS
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 FX +1-937-743-5664
Document Number:
PD196-058R4
DVD
Basic controls
Basic controls are located on the side of the DVD player or on the PD108-425 remote.
NOTE: It is recommended to use the remote for basic controls.
Play:
Press Play/Pause (
►
/
) on the remote to start a video.
NOTE:
When the disc is first inserted, it may start to play automatically. You
may also be taken to a menu. If so, use navigational buttons. (See Navigating
menus).
Pause:
Press Play/Pause (
►
/
) on the remote while a video is playing to pause it.
Stop:
Press Stop (
■
) on the remote to end playback. Press it
twice to cancel memory (This will allow playback to start at the beginning of the
DVD rather than at the place last stopped.)
Advancing chapters/restarting or returning to chapters:
Press Skip+ on
the remote to advance to the next chapter. Press Skip- to start at the beginning of the
current chapter. Press Skip- twice to return to the previous chapter.
Fast forward/Fast rewind:
Press F.FWD to advance through the DVD. Press
F.RWD to rewind through a DVD. The F.FWD and F.RWD speeds are 2x, 4x, 8x,
16x, and 32x. Press Play/Pause to return to normal play mode.
Navigating menus
Use the four directional buttons surrounding the OK button on the remote to navigate
through menus and highlight their selections. Press OK when you are on the desired
selection.
Other DVD controls
Besides the basic functions, there are more features that can be used during playback.
Dimmer:
Press DIMMER to adjust the brightness of the text on the DVD player’s display screen. The
button needs to be pressed repeatedly to cycle through the choices.
1.
Dimmer High
2.
Dimmer Normal
3.
Dimmer Low
4.
Dimmer Off
Step-by-Step playback:
This is enabled by repeatedly pressing Pause (
) on the DVD unit.
NOTE:
Play/Pause on remote does not control Step-by-Step playback.
Slow playback:
This allows video to be played at a rate slower than normal playback. The rates of
speed are 1/2, 1/4, 1/6, and 1/8.
1.
Press SLOW on the remote to cycle through the four rates of speed.
2.
Press PLAY/PAUSE to return to the normal playback rate.
Zoom:
You can zoom in on video and move it around on the TV screen. You can zoom in 1x, 2x, or
3x.
1.
Press ZOOM to zoom in on the video: 1x, 2x, or 3x.
2.
When zoomed in 1x, 2x, or 3x, use the directional buttons to move the video around on the screen.
3.
To return normal viewing, press ZOOM until Zoom Off appears on the screen.