Communication
Systems Inc.
PDI-DVD-SA Player
Installation Guide
Page 17 of 26
Better Solutions Are Within Reach™
INSTALLATION and OPERATING INSTRUCTIONS
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 FX +1-937-743-5664
Document Number:
PD196-058R4
Bookmarking segments of a CD:
You can temporarily store up to three places on a CD you want to easily return to.
Bookmarks will be erased when the disc is ejected.
1. Select place on disc you want to bookmark.
i. You can use SKIP+ and F.FWD/F.RWD to get to spot
ii. Press Pause when desired spot reached.
2. Press the MARK button on remote to display a menu with Bookmark 1, Bookmark 2, and Bookmark
3.
i.
Bookmark 1 is highlighted. If no time is entered, press OK and the time of the place in the video
you selected while doing Step 1will be entered.
ii.
If you want to enter a second and third place in a video, press MARK and select another place in
the video.
iii.
Return to the menu.
iv.
Press the down directional button to highlight Bookmark 2 or 3.
3. Press OK and the time of the place in the video you selected will be entered 3. Erase or reset the
bookmarks.
i.
Press MARK to display Bookmark menu
ii.
Press CLR to erase Bookmark 1.
iii.
Press the down directional button to highlight Bookmark 2 or 3.
iv.
Press CLR to clear highlighted bookmark setting.
v.
To set new bookmark, follow steps 1 and 2.
Creating customized sound clip on a CD that repeats:
You can create a clip in a CD that starts and stops
at desired points.
1. Press A-B at the place in the video you want clip to start. Rep A- appears on the screen
2. Press A-B at the place in the video you want clip to end. Rep A-B appears on the screen
3. Press A-B again to cancel clip setting. Rep A-B Off appears on the screen
NOTE: The DVD player does not allow you to start an audio clip in one
track and end it in the subsequent track. (e.g. If you press A-B in track 1,
it will cancel A-B at the start of track 2.).
Filters
With filters you can control how the CD replays.
There are two sections in filter that can be set Repeat and Mode.
1. Press the right directional button to enter the Function Window.
NOTE: If you have created a program (See Putting tracks on a CD
in desired order section on page 18), you will already be in the
Function Window. Press the up directional buttons to highlight the
Filter adjustments.
2. Press the down directional button to highlight Repeat and/or Mode.
3. Press OK to see the menu choices. (See descriptions below.)
4. Press the down directional button to highlight the desired choice.
5. Press OK.
6. Press the left directional button to return to the Document Window and press PLAY/PAUSE to play.
Repeat allows you to set how the CD will play.
Off:
CD will play through once.
Single:
Repeats 1 track.
All:
Repeats entire CD.
Mode allows you to shuffle the tracks on a CD.
Off:
The tracks play in the order that they are on the disc.
Shuffle:
The tracks are played randomly.
Music Intro.:
Plays the first 10 seconds of a track.
NOTE: In the setting Repeat: Off and Mode: Shuffle, all the tracks on a CD
are played once in random order
.
