PDi medTV16, Руководство пользователя

Страница: 19 / 21

MODEL:
medTV
16
Document Number:
PD196-405R3
User Manual Page 19 of 21
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
www.pdiarm.com and www.mymedTV.com
▪ Phone 800.628.9870
Diagnostics
This menu provides readouts of the TV’s internal operation. The Diagnostics menu items are read -only and cannot be changed.
1. Enter the System menu.
2. Press CH▲ or CH▼ to highlight Diagnostics .
3. Press VOL ► to select it.
4. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.
Field ON Hours: Cumulative time TV is actually on.
Field Powered Hours:
Cumulative time TV is powered.
Reset to Factory Defaults
Use this setting to
restore the TV to factory defaults. Select CH▲ for YES or CH▼ for NO.
Standby Power
Controls power used by TV when in “Standby” or OFF stage.
1. Press the SETUP button on the remote control.
2. Press CH▲ or CH▼ to select System .
3. Press VOL ◄ or VOL ► to se lect it.
4. Press CH▲ or CH▼ to select Standby Power .
5. Press VOL ◄ or ► to select Low/Normal.
Note : If in “low” mode, TV consumes less power but takes longer to start when turned back on .
6. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.
Cloning/Firmware/Splash Updates
Cloning allows you to quickly and easily copy settings and channels from one TV to other TVs. Clone operation involves first
downloading setup information from a programmed host TV to a USB memory stick (thumb drive) and then uploading the setup
information to another TV. Alternatively, clone files can be loaded to the RF-HEMiS Head-end TV Server by PDi and distributed to
other TVs. Cloning can also be used to re-program an already programmed TV.
Save Settings to USB
1.
Turn on the TV
2.
Insert a USB thumb drive into the cloning port on the front of the TV. The USB Cloning and FW Update Menu will appear
on the TV screen.
3.
Press CH ▲ or CH ▼ to highlight Save Settings to USB .
4.
Press VOL► to display the Save Settings to USB menu.
5.
CH▼ to rename the *.TDF f i le. Press VOL◄/ VOL► to set each placeholder in filename. Press OK to lock -in each place.
6.
Press OK to clear any red text and lock-in filename.
7.
Press CH ▲ to Save.
8.
Press VOL◄/ VOL► to overwrite or Save filename to USB.
■ Support Information ►
Position:
▲▼
Exit: SETUP or LAST Next:
◄►
■
Field ON Hours 000204
■
Field Powered Hours 001204
Exit: SETUP or LAST