PDi medTV16, Руководство пользователя

Страница: 18 / 21

MODEL:
medTV
16
Document Number:
PD196-405R3
User Manual Page 18 of 21
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
www.pdiarm.com and www.mymedTV.com
▪ Phone 800.628.9870
4. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.
SOURCES
The TV’s signal sources can be individually Enabled or Disabled. The available sources in this menu correspond with the
components you have connected to the TV’s connectors.
NOTE: Please disable all TV sources that are not to be
used. A TV that is switched to a non-connected source
generates nuisance hospital maintenance calls of TV Not
Working, when in fact the TV does work, but has been set
to an inactive source.
1. From the SETUP menu, press CH▲ or CH▼ to
highlight Sources .
2. Press VOL ◄ or VOL ► to select it.
3. Press CH▲ or CH▼ to highlight a desired source.
4. Press VOL ◄ or VOL ► to change the source status to
either Disabled or Enabled/APO (Auto Power Off) or
Enabled/No APO (No Auto Power Off).
NOTE: Sources that are grayed out are not installed
in the TV. Enabled/APO means the TV will turn off if
there is no video.
5. Press SETUP to return to the previous menu. To exit,
press SETUP until the programming menus
disappear.
Power on Source
The TV can be preset to power on to a selected source.
1. Enter the SETUP menu
2. Press CH▲ or CH▼ highlight Sources .
3. Press VOL ► to select it.
4. Press VOL◄ or VOL► to change to the source that you want the TV to power on to.
NOTE: The source must be enabled before it can be chosen as a power on source. The Last entry causes the TV to power
on to the Last source selected.
5. Press SETUP to return to the previous menu. To exit, press SETUP until the programming menus disappear.
SYSTEM
The System menu provides access to technical settings for your hospital TV.
1. Press the SETUP button.
2. Press CH▲ or CH▼ to highlight System.
3. Press VOL► to enter the System sub-menu.
Sources
■
Source Enable
►
■
Source Name
►
■
Power On Source Last
Position:
▲▼
Exit: SETUP or LAST Next: ◄►
System
■ Diagnostics ►
■ Reset to Factory Defaults ►
■
Standby Power Normal
■
USB Cloning, Firmware, Splash
Update
►
■
RF Cloning, Firmware, Splash
Update
►
■
MTI/SmartPort Personality MTI
■
Security ►
Diagnostics
■ Model PDI-P16W
■ Firmware Ver 1.01
■
Boot Ver 0.4
■
Power On Cause Cold
■ Pro:Idiom Status Non Pro:Idiom Ch
(D279)
■
CCI/MTI/SmartPort Disconnected
■
CCI Ver 5.1