PDi CM-220, Инструкция по эксплуатации

Страница: 10 / 13

10
Non-Contact AC Voltage Measurements
1. Turn meter on and touch the clamp tip to the suspected
hot conductor or insert into the hot side of the electrical
outlet.
2. If AC voltage is present, the detector light will illuminate.
NOTE : The conductors in electrical cord sets are often
twisted. For best results, rub the probe tip along a
length of the cord to assure placing the tip in close
proximity to the live conductor.
NOTE : The detector is designed with high sensitivity. Static
electricity or other sources of energy may randomly
trip the sensor. This is normal operation
MODE BUTTON
To select between DC/ACV,
Ω,Diode,Continuity,CAP,

C,

F
MIN & MAX Recording Button
Press MIN/MAX to enter MIN, MAX Recording mode
(manual range only ). Select the proper range before
selecting MIN MAX to ensure that the MIN/MAX reading will
not exceed the testing range. Press once to select
MIN .
Press again to select MAX . and press again release
MIN/MAX recording function.
REL BUTTON
For Offset adjustment.
WARNING: Risk of Electrocution. Before use, always
test the Voltage Detector on a known live circuit to verify
proper operation