User Manual for IP-PTZ643/645
43
(a switch).
The switch
forwards the identity and password to the authentication server
(RADIUS server).
The switch
forwards the certificate of authentication server to the network
camera.
If all the information is validated, the switch allows the network access to the
protected network.
Steps:
1. Connect the network camera to your PC directly with a network cable.
2. Enter the 802.1X Settings interface:
Configuration > Advanced Configuration > Network > 802.1X
Figure 5-16 802.1X Settings
3. Check the
Enable IEEE 802.1X
checkbox to enable it.
4. Configure the 802.1X settings, including user name and password.
Note:
The EAP-MD5 version must be identical with that of the router or the
switch.
5. Enter the user name and password (issued by the CA) to access the server.
6. Click
to finish the settings.
Notes:
The camera reboots when you save the settings.
7. After the configuration, connect the camera to the protected network.
5.3.7 Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
Steps:
1. Enter the QoS Settings interface:
Configuration >Advanced Configuration > Network > QoS