manualshive.com logo in svg

PCS PO-KPCW6, Руководство пользователя

Поделиться
Скачать
PCS PO-KPCW6 Скачать руководство пользователя страница 36

Chapter 4— LED Indicators 

PCS 6-Button Controllers also allow each LED indicator to either turn on or 
turn off one other group of LEDs whenever that LED indicator lights up.  
The Receive Components tab of the Edit Device dialog has selectors for 
each LED to specify the action (Turn On, Turn Off, Do Nothing) and the 
LED group to perform that action on. 

To program this configuration into the device we press the “Program 
Device” button.  UPStart performs the necessary command steps to program 
the configuration data into our device.  When the command steps are 
complete we can press the OK button to close the dialog. 

Configuring Pushbutton Indicator Brightness 

The 6-Button Controller has pushbuttons that light up when certain events 
occur.  The Controller allows you to choose between five brightness levels 
(including off) to have the pushbuttons light up to.  The pushbutton 
indicator brightness can be set to either High, Medium, Low, Faint, or 
None.  This chapter will explain the steps necessary to configure the 
Indicator Brightness for the 6-Button Controller. 

By default, the Indicator Brightness on the 6-Button Controller is set to 
“High”.  This level of brightness allows the pushbutton indicator to be seen 
even in most daylight situations. 

The default Indicator Brightness is fine for most situations but what if you 
prefer something else?  Suppose the pushbutton indicators are too bright 
and keep us awake at night.  We might want to set their brightness to a 
lower level or not have them come on at all.  All of this can be easily 
configured using UPStart. 

Example - Changing To A Lower Indicator Brightness  

For our example, the pushbutton indicators on our Main Bedroom 
Controller are too bright and keeping us awake at night.  We want the 
pushbutton indicators set to a lower brightness setting.  To do this we again 
use the Edit Device Dialog of our Main Bedroom Controller. This dialog 
has a special Options tab that is used for configuring options such as the 
Indicator Brightness. 

32 

The UPB 6-Button Controller User’s Guide 

Содержание PO-KPCW6


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды