PCS DTC6, Инструкция по установке и эксплуатации, Страница: 7 / 9

Option Factory Default Possibilities
ON Pushbutton
UPB Transmissions
Button Mode =
On Button
Link = 001
Configure any of 15 different UPB Messages
to be transmitted upon each of four
Pushbutton Events to any of 254 Link IDs.
OFF Pushbutton
UPB Transmissions
Button Mode =
Off Button
Link = 002
Configure any of 15 different UPB Messages
to be transmitted upon each of four
Pushbutton Events to any of 254 Link IDs.
A , B , C , and D
Pushbutton UPB
Transmissions
Button Mode =
Scene Activator
Links = 003, 004, 005,
006
Configure any of 15 different UPB Messages
to be transmitted upon each of four
Pushbutton Events to any of 254 Link IDs.
UP Pushbutton UPB
Transmissions
Button Mode =
Bright Button
Link = Use Last Link
Configure any of 15 different UPB Messages
to be transmitted upon each of four
Pushbutton Events to any of 254 Link IDs.
DOWN Pushbutton
UPB Transmissions
Button Mode =
Dim Button
Link = Use Last Link
Configure any of 15 different UPB Messages
to be transmitted upon each of four
Pushbutton Events to any of 254 Link IDs.
ON , OFF , A , B , C ,
and D LED Indicator
Receiving Link ID
Each LED Indicator is
assigned to its
pushbutton’s Link ID.
Each LED Indicator can be assigned to any
of 254 Link IDs.
ON , OFF , A , B , C ,
and D LED Indicator
Mutual Exclusivity
Each LED Indicator is
mutually exclusive (one
LED on at a time).
Each LED Indicator can be configured as
mutually exclusive (one LED on at a time) or
independent (multiple LEDs on at one time).
UPB Transmission
Attempts 2 1, 2, 3, or 4 transmissions per event.
UPB ID NID = 255,
UID = 003
Many UPB Identification parameters can be
configured including the Network ID (NID),
Unit ID (UID), Network Password, Network
Name, Room Name, Device Name, etc.
LED Brightness High High, Medium, Low, Faint, None
LED Backlighting
(very low lighting of
all buttons so device
can be located in
darkness) Enabled Enabled or Disabled
Table 1: 6-Button Controller Configuration Options
Page 6 of 8