PCS DTC6 Скачать руководство пользователя страница 6

The UP and DOWN Pushbuttons 

By default, the 

UP

 pushbutton is configured to slowly 

brighten

 the Wall Switch Dimmers when it 

is held down and stop brightening when it is released. 
 
By default, the 

DOWN

 pushbutton is configured to slowly 

dim

 the Wall Switch Dimmers when it 

is held down and stop dimming when it is released. 
 

Configuring The 6-Button Controller 

The 6-Button Controller is highly configurable.  Many of its configuration options can only be 
enabled or modified with the use of a UPB™ Setup Tool.  Please refer to the UPB Lighting 
System User’s Guide on the PCS web site for instructions on how to change the 6-Button 
Controller’s configuration.  Table 1 describes the many configuration options available that can 
be set up with the use of a UPB™ Setup Tool. 

 

NOTE

: Although the factory default operation of the 6-Button Controller is useful in many 

situations, it is highly recommended that your 6-Button Controller be configured with a 
UPB Setup Tool so that you can take advantage of its many configurable features. 
 
PCS has developed a Powerline Interface Module (PIM) and free UPB Setup Tool 
software (UPStart) to help you configure all of your UPB Lighting System devices.  The 
UPB Lighting System User’s Guide (available on the PCS web site) explains how to 
configure your system using the UPStart tool. 

 

 

Page 5 of 8 

Содержание DTC6










Отзывы: