
About Your WMC6 Wall-Mount 6-Button Controller
Congratulations on your purchase of a WMC6 Wall-Mount 6-Button Controller. We feel that the
6-Button Controller is the perfect choice for controlling your UPB
TM
Lighting System devices
(e.g. Wall Switch Dimmers, etc.) to create a dramatic home lighting system. After installing and
configuring your WMC6 you’ll be able to transmit standard UPB™ commands over the existing
powerline to remotely control your UPB
TM
Lighting System devices and be able to see its
pushbuttons light-up for feedback.
The WMC6 (see Figure 1) has six pushbuttons normally labeled
ON
,
A
,
B
,
C
,
D
, and
OFF
(see
NOTE below) with LED backlighting and two buttons (
UP
and
DOWN
) without backlighting. All
of the components of the WMC6 are highly configurable so that you can customize them to
operate your UPB
TM
Lighting System the exact way you desire.
Figure 1: The WMC6 Wall-Mount 6-Button Controller
About Your DTC6 Desk-Top 6-Button Controller
The DTC6 Desk-Top 6-Button Controller is basically the same as the WMC6 described above
except it is packaged in a plastic case with a line cord to plug directly into a wall outlet. The
DTC6 requires no installation instructions. Simply plug it in and begin controlling your UPB
Lighting System devices.
ON Button
B Button
C Button
D Button
OFF Button
A Button
UP/DOWN
Button
IR Receiver
(Future)
NOTE: Custom engraving of the keypad pushbuttons can be ordered on the PCS web site
for a nominal charge. Custom engraving allows the user to identify each button for ease
of use and to add beauty and functionality to any room.
Page 2 of 8
Содержание DTC6
Страница 1: ......