Brought to you by PCS Electronics, www.pcs-electronics.com
34
Common controls
These are common controls belonging to all program tabs.
Move to tray
Click
Move to tray to move this program into taskbar.
Check
To tray at start checkbox to start the program minimized in
system tray.
Preview
This window shows PS and RT preview.
Select desired preview type by clicking appropriate radio button.
RDS active
Check this box to activate RDS features.
Send settings
Send TX settings and Send RT and PS buttons may change their
appearance and accessibility according to currently active tab.
Use
Send settings to send parameter PS00 and RT to RDS
encoder.
Use
Send RT and PS to send all PS and RT parameters to RDS
encoder.
Shut down TX at exit
Check this box to automatically reduce transmitting power to 0 when
exiting the program.
Send settings at start
Check this box to automatically send TX settings at starting the
program. This may come handy when Shutdown TX at exit is activated to
automatically raise TX power when next time starting the program.
Audio histogram
Every time the transmitter status is read, a new audio level value is added at the histogram. Status may be read
manually (by clicking
Read TX button) or automatically (by checking Auto TX read checkbox). Levels above 80%
are marked in red colour.
Status window
Some communication activities can be observed here.
