PINO 3.0 E Building Instruction August 2018
www.pcm.at
3
DATA
1. Kit
– contents
Fu canopy
Wing
Elevator
Lever for controlling ailerons, 2 pc.
Lever for controlling flaps, 2 pc.
Bowden pushrods for Elevator and Rudder 2 pc.
M2.5 screw rod for controlling ailerons, 4 pc.
10x lever connectors M2,5
M4 metal screws for fixing wing, 4 pc.
M4 nylon screws for fixing wing, 4 pc.
Spring-loaded contacts 4 pairs
Gap covers for aileron, flap, elevator, rudder
12mm carbon rod wing connectors, 2 pc.
12mm steel rod wing connectors, 2 pc.
6mm carbon rod elevator connector, 2 pc.
2mm carbon rod for elevator, 4 pc.
Twisted servo lead
Connectors / ballast:
Segler / Glider
Elektro
Slope
2x
carbon rod
2x
steel rod
2x long steel rods
2x
carbon rod
2x
steel rod
2x long steel rods
Medium
2x
carbon rod
2x
steel rod
2x
carbon rod
2x
steel rod
Ultralight
2x carbon tubes
2x steel tubes
2x carbon tubes
2x steel tubes
2. What else do you need:
Epoxy-glue (for example UHU 300 endfest or Pattex Stabilit)
Super glue (runny)
Electrical equipment (On/Off-switch, cables, plug...)
Electronic equipment
Shrinking tube...
3. Electronic equipment
Servo ailerons:
Servo flaps:
- KST DS 135 MG
- KST DS 125 MG
Servo rudder and elevator:
- KST X08 V5
Receiver:
- for 4 wing servos, rudder and elevator
Power Set
Tenshock EDF TS-EZ1515 - 13T - 4pol 4200KV with Micro Edition 5:1NL
1300mAh 3S Wellpower
Speed Controller 50A
Prop GM Reisenauer 14x7 (2,4kg Thrust!). Prop fits great to the fuselage.
RFM Spinner d=28mm with offset 0°
