PINO 3.0 E Building Instruction August 2018
www.pcm.at
11
Now screw the
narrow board
to
the bottom
of the servoboard.
In order to glue it into the
fuselage, put a mixture of
epoxy-cottonflocs just onto
this narrow board
.
Then put the
servoboard into
the fuselage
.
Connect the
horns
to the pushrods and set
everything to
zero
(servos and
control surfaces).
Then press the board down to
glue it well
to the bottom.
If you want to change the servos
sometime, you can
loosen the
screws through the holes in
the fuselage
.
