FW6 Building Instruction February 2015
www.pcm.at
11
You can fill the
glue into a small plastic bag
and cut a whole
on one corner. By this, it will be
easier to apply
the glue
exactly.
Add carbon rovings left and right of the gluing spots for
additional strength. Best way to apply is together with
gluing of the board.
If you have a
hard landing
, always
check
if the radio board is
still fully glued before you make the next start!
Here you see how the carbon roving is placed.
The carbon roving has to be at the left and right and the upper
and lower side of the servoboard.