PCI Fonemosa 4204A, Руководство пользователя

Страница: 17 / 18

- 17 -
Fonemosa unit over IP. At this point your will hear the ring
back tone again
6. Wait for the remote party to answer the call. Pick up the phone to begin voice communication over IP.
Automatic IP Learning (The automatic answering function on the remote Fonemosa unit is enabled.)
Local FONEMOSA Remote FONEMOSA
1. Assuming user dials a VoIP phone number,
for example “*
002862164458275#”
2. Check the IP information in the dynamic phone book. (If the
number can be found, end the learning procedure and use
that IP to setup the call)
3. If the number can’t be found in the dynamic phone book, the
Fonemosa unit will then use the phone line to dial
“002862164458275” through the PSTN to reach the remote
Fonemosa unit and attempt to acquire the IP information. At
this point you will hear the ring back tone
After a few seconds the Fonemosa unit will be rung. (The FXO
LED should be flashing, but phone will not ring) The Fonemosa
unit will auto-answer.
4. The learning procedure will not start until the party receiving
the call answers the phone. In the duration of the learning
process you will hear short sounds that should continue for
about 30 seconds
The FXO LED is ON, but the phone is disabled
5. If the learning procedure is successful, the Fonemosa unit
will automatically disconnect the phone call made through
the PSTN . And should then begin dialing the remote
Fonemosa unit over IP. At this point your will hear the ring
back tone again
The phone should start ringing.
6. Waiting for the remote party to answer the call. Pick up the phone to begin voice communication over IP.
Manual IP Learning (The automatic answering function on the remote Fonemosa unit could be either enabled
or disabled)
Local FONEMOSA Remote FONEMOSA
1. Assuming the user makes a traditional phone call through
the PSTN to reach a remote Fonemosa unit, for
example ”
002862164458275”
(You will then hear the ring
back tone).
After a few seconds the phone will begin ringing. (The FXO LED
should be flashing)
2. Waiting for the recipient to answer the phone, ask him/her to Pick up the phone and press the
“
＃
” key twice,
the learning