PCI Fonemosa 4204A Скачать руководство пользователя

Страница: 1 / 18

- 1 -

FONEMOSA

4204

Note: For more detailed hardware installation instructions, please refer to the

FONEMOSA 4204/4208/4216 User’s Guide

found

on the CD accompanying the unit.

Notices for phone line connections

The phone line should be connected to the FXO port. It should not be connected to the FXS port as doing so may cause damage to

the product!

Connect the phone or system console to perform basic configurations

With the Fonemosa (4204) unit, you can use a telephone set to perform basic configurations such as setting the region ID, IP

address and web interface password. For the Fonemosa (4208/4216) units, you can use either a telephone set or a system console

to configure the system. However, if the Fonemosa (4208/4216) units are equipped with FXO ports only, performing configurations

using a telephone set will be unavailable.

Connect a phone to the Fonemosa (4204) unit

I. Basic Configuration: Region ID, IP address and Web passwords

Содержание Fonemosa 4204A



















Результаты поиска

Содержание Fonemosa 4204A

Отзывы:

Похожие инструкции для Fonemosa 4204A

Бренды по названию

Популярные бренды

PCI Fonemosa 4204A, Руководство пользователя

Результаты поиска

Содержание Fonemosa 4204A

Отзывы:

Похожие инструкции для Fonemosa 4204A

Бренды по названию

Популярные бренды