Manual
6
Power button: Press this button to turn the device on (button lock in place). Press the button
again to turn the device off (button unlocks).
DC interface: Only use the mains adaptor included in the package. If it breaks down, only use
substitutions with the following characteristics: output 5 V DC, 2 A.
USB/RS-232 interface: By using the USB interface, you can transfer data from the colorimeter to
a PC. The baud rate is 115,200 bps.
4.3
Battery
Installing the battery
1. Make sure that the colorimeter is turned off.
2. Open the cover of the battery compartment.
3. Insert the battery into the allocated space.
4. Close the cover of the battery compartment.
Charging the battery
The battery can only be charged when the colorimeter is connected to a PC or to the mains adaptor.
Note: If the battery is damaged, the device can still be used via an external power source (PC / mains
adaptor).
