Byte8:
Digit 3 (most significant) in upper LCD.
Byte9:
Digit 2 in upper LCD.
Byte10:
Digit 1 in upper LCD.
Byte11:
Digit 0 (least significant) in upper LCD.
Byte12:
Digit 3 (most significant) in lower LCD.
Byte13:
Digit 2 in lower LCD.
Byte14:
Digit 1 in lower LCD.
Byte15:
Digit 0 (least significant) in lower LCD.
3.14.
Down Load Data to Personal Computer (AVM-07)
Press the D. LOAD button (number 5) to send all the data stored in memory to RS-232 port.
3.15.
Data Format Stored in Memory
Byte0: 0D (hex)
Byte1: Calibration Data 0
Byte2: Calibration Data 1
Byte3: Calibration Data 2
Byte4: Sampling Time
Byte5: Last Record Number (low byte)
Byte6: Last Record Number (high byte)
Byte7: Free Area (low byte)
Byte8: Free Area (high byte)
Byte9: Decimal point of area(refer to byte 778)
Byte10-768
Reserved
Byte769-784 Record 1(16 bytes per record)
Byte769:
Digit 0 (least significant) in lower LCD.
Byte770:
Digit 1 in lower LCD.
Byte771:
Digit 2 in lower LCD.
Byte772:
Digit 3 (most significant) in lower LCD.
Byte773:
Digit 0 (least significant) in upper LCD.
Byte774:
Digit 1 in upper LCD.
Byte775:
Digit 2 in upper LCD.
Byte776:
Digit 3 (most significant) in upper LCD.
Byte777:
Upper LCD decimal point
bit2: x1, bit3: dp1 (right most), bit4: dp2, bit5: dp3 (left most).
Byte778:
Lower LCD decimal point.
bit0: x100, bit1: x10, bit2: x1, bit3: dp1 (right most), bit4: dp2, bit4: dp3 (left most).
Byte779:
bit0: 0-CMM, 1-CFM, bit3: Low Battery, bit4: temperature -OL, bit5: AVE, bit6: 2/3Vmax,
bit7: Instant
Byte780:
bit2: MAX, bit3: MIN, bit4:0-VEL, 1:FLOW, bit5: 0-Degree C, 1-Degree F, bit7: RS-232
enabled.
Byte781:
0: m/s, 1: ft/min, 2: knots, 3:km/hr, 4:MPH
Byte782:
bit4: Velocity OL, bit5: Area OL, bit6: temperature OL.
Byte783:
Not used
Byte784:
Not used
Byte785-32768
Record number 2 to Record 2000
