PCE Instruments Brookhuis FMC, Руководство по эксплуатации

Страница: 10 / 25

Operating Instructions FMC/FME moisture meter
5 Starting up and settings
This chapter describes the operations required to start up the FMC/E.
5.1 Installing the battery
The battery compartment is at the back of the FMC/E, as shown in Figure 5-1
)
Open the battery compartment by gently pressing down the groove in
the lid and then lifting it up.
)
Connect the 9 Volt battery supplied with the meter to the attachment clip
and then close the compartment by replacing the lid. The FMC/E is now
ready to be set up.
When removing the battery, hold the attachment clip – not the wires .
Use alkaline batteries only.
Figure 5-1