PCE Instruments Brookhuis FMC, Руководство по эксплуатации

Страница: 14 / 25

Operating Instructions FMC/FME moisture meter
)
Drill two holes in the material being measured using the
concrete drill supplied. The holes should be approximately
25 cm apart.
)
Sprinkle graphite powder on the measuring pin contact
sockets.
)
Insert the measuring pins and contact sockets into the holes.
Turn the measuring pins clockwise until they are secured in
the material being measured.
The meter is now ready for setting (see section 5.3)
Once a measurement has been taken, the measuring pins
can be removed from the holes by turning them anticlockwise.