© PCE Instruments
15
4.7.6
Set time
Confirm the selection of the "Set time" function with the RIGHT navigation key.
A list appears.
- Select the value to be changed with UP / DOWN.
- Confirm with SELECT.
The field turns grey and you can change the numerical value.
- Press RIGHT or LEFT to change the digit position.
- Press UP or DOWN to change the digit value.
- Confirm with ENTER.
- Press LEFT or ENTER to return to the "Settings" menu.
- Press MENU to enter measuring mode.
4.7.7
Spot / marker for the MIN and MAX temperature in the image
Confirm the selection of the "Spot" function with the RIGHT navigation key.
A selection list appears.
- Select with UP / DOWN.
- Confirm with SELECT. The selection is marked with a small circle.
- Press LEFT or ENTER to return to the "Settings" menu.
- Press MENU to enter measuring mode.
5
Troubleshooting
If you have any problems with the thermal imaging camera, first look at the table below. If the
suggested solutions do not help you, contact our technical support.
Problem
Possible cause
Solution
Thermal imaging camera
cannot be started
No battery inserted
Insert battery.
Battery flat
Replace
or
charge
the
battery.
Thermal imaging camera
switches off during operation
Battery flat
Replace
or
charge
the
battery.
The time set for automatic
shutdown has been reached.
Restart.
No thermal image
The protective cover is not
open.
Open the lens cover.
