© PCE Instruments
10
4.3
Submenus
4.3.1
Image registration / Adjust IR image and general image
It may happen that the infrared image and the normal image on the display do not overlap
completely. This can be corrected via the menu "Image registration".
Press the MENU key. A selection list of submenus appears.
The current function is highlighted in blue.
The selection can be changed with the navigation keys UP or DOWN.
Confirm the selection "Image registration" with the SELECT key.
- Four thick white directional arrows appear for a short time, starting from the centre of the
image.
- As long as these arrows are displayed, you can move the general picture.
- Press and release RIGHT, LEFT, UP or DOWN briefly to move the image.
If no operation is performed for more than 6 seconds, the camera automatically switches back
to measuring mode and the direction arrows disappear. If the images still do not overlap
correctly, call up the function again.
4.4
Display / delete saved images
You can view and delete saved images via the "Image" submenu.
Press the MENU key. The current function is highlighted in blue.
The selection can be changed with the navigation keys UP or DOWN.
Confirm the selection of the "Image" function with the RIGHT navigation key.
A list of the saved images appears.
- Use the UP or DOWN key to select an image from the list.
- Confirm with SELECT or ENTER.
- The selected image is displayed and you can now
- use the RIGHT or LEFT key to go directly to the next or previous image.
- use the UP key to open the dialogue window "Delete image? Yes / No".
Press MENU for "Yes" or SELECT for "No".
- Press SELECT or ENTER to return to the list of saved images.
Now press
- LEFT to return to the list of submenus
- MENU to enter measuring mode
