© PCE Instruments
9
⑤
HOLD Button
Press the HOLD button (HOLD annunciator turns on) makes the meter stop updating
the LCD display. This mode can be nested in most of the special modes. Enabling
HOLD function in automatic mode makes the meter switch to manual mode, but the full
scale range remains the same. Hold function can be cancelled by changing the
measurement mode, pressing range, or push HOLD again.
⑥
COM Terminal
This is the ground input terminal. Use the BLACK test lead to connect.
⑦
"+" Terminal
This is positive input terminal for voltage / ohm measurement. Use the RED test lead
to connect.
7
Measurement
7.1
Voltage measurement
•
Insert the BLACK test lead to COM and the RED test lead to the "+" terminal.
•
Switch to V
function for ACV or DCV selection.
•
Get the reading directly from the LCD.
ACV
