PCB Arts GmbH
Instruction Manual Vapor Phase One
Page
22
of
27
3.5
Running the self-test
The Selftest is mainly available for troubleshooting. There are two buttons on the back of the
vapor phase soldering system, the button marked "II" is available for the self-test. When you
press this, the display will ask you if you want to perform a self-test. This takes about 5
minutes. During this time, all actuators are moved or switched on and an exact logging is
performed. The data is stored on the SD card. The self-test may only be performed when the
vapor phase soldering system is initialized.
