PCB Piezotronics IMI SENSORS 649A04, Инструкция по установке и эксплуатации

Страница: 19 / 26

PAGE 14
SENSO
RS AN
D INS
TRUME
N
TATIO
N F
OR MAC
HINE
CON
DITION M
ONIT
ORIN
G
Programming Sections
The screen has three sections:

649A04 Unit Selection & Vibration Data
– This section displays the current vibration data and current
level. It also has a control to select English or metric display units.

Actual 649A04 Settings
– This section shows the settings currently programed in the sensor.

649A04 Settings to Write
– This section shows the options for programming the sensor.
Figure 19
– Typical Screen After Successful Parameter Read
Reading and Writing Parameters

Reading Parameters - To read the current sensor settings, click the Read Parameters button. This
operation takes approximately 45 seconds to complete.

Transferring Actual Settings to Settings to Write Field -
Use the ‘>>>’ button to transfer all Actual Settings
to the Settings to Write fields.

Writing Parameters- Select the appropriate mode and enter any pertinent parameter information. Click the
Set Parameters button. This causes the settings to be sent to the sensor and then read back and
displayed in the Actual 649A04 Settings.