PC-EFTPOS CBA i5100, Справочное руководство

Страница: 16 / 33

PC-EFTPOS-CBA i5100 Guide Page 16 03/07/2008
8.5
Card Read Test on PINpad
If you are experiencing difficulties reader cards, run this test to see if it is a hardware issue.

On the i5100 terminal, press [Func] and then [2]
( Terminal)
.

Enter the Managers password (by default is 000000) and then press [OK]

Press [1]
(Configure)

Press [5]
(Self Test)

Press [1]
(Card Reader Test)

Swipe your Card and repeat.
8.6
Turn PINpad lock On/Off
By default the i5100 PINpad will turn on the pinpad lock if the terminal has not been in use for 10 minutes.
After 10 mins, the pinpad will display
COMMONWEALTH BANK
EFTPOS
PINPAD LOCKED
Once the pinpad has been locked, you will need to press any key on the pinpad and then enter the Manager’s
password (by default is
000000 ) and press [OK], to turn the lock off.
To turn the pinpad lock on/off

On the i5100 terminal, press [Func] and then [2]
( Terminal)
.

Enter the Managers password (by default is 000000 ) and then press [OK]

Press [1]
(Configure)

Press [1]
(Pinpad Lock)

Press [1]
(Lock On/Off)

Press either the key under [ON] or [OFF] to turn the pinpad lock on or off
To configure the pinpad lock timeout (setting only works when pinpad lock is On)

On the i5100 terminal, press [Func] and then [2]
( Terminal)
.

Enter the Managers password (by default is 000000) and then press [OK]

Press [1]
(Configure)

Press [1]
(Pinpad Lock)

Press [2]
(Set Timeout)

Enter a number between 2 and 99 (mins)

The pinpad will then be locked if no key presses have been detected within the set time