PC-EFTPOS-CBA i5100 Guide Page 10 03/07/2008
4.
Initial I5100 PINpad Setup
The CBA i5100 is a combined standalone\integrated PINpad. It is usually delivered in “standalone mode”.
Before you
install the software
, the PINpad needs to be switched to “PC-EFTPOS mode” so that the PC-
EFTPOS software can communicate with it.
Switch the PINpad to “PC-EFTPOS Mode”
Is the PINpad screen blank?
o
If
YES
, this is already in PC-EFTPOS mode.
Proceed to the
software installation
section
o
If
NO
then check to see if the pinpad displays the hidden menu
1. TERMINAL CONFIG
2. APPLICATION CONFIG
3. STATS & PARAMETERS
If not, then you will need to enable it. Press
[Func]
and then
[9]
and type in your
hidden password*
*To obtain your hidden password, please call either CBA or PC-EFTPOS and have
the last 6 digits of the terminals serial number with you.
o
Once you are in the hidden menu, press
[1]
Terminal Config.,
[3]
PC-EFTPOS Mode,
[CHQ]
On.
(On some terminals the
[CHQ]
button will be the Top Left Yellow button).
o
The PINpad will reset and display a blank screen.
Proceed to the
software installation
section
