36
Motherboard User’s Guide
3
The support software will automatically install.
Once any of the installation procedures start, software is automatically installed in
sequence. You need to follow the onscreen instructions, confirm commands and
allow the computer to restart as few times as needed to complete installing what-
ever software you selected. When the process is finished, all the support software
will be installed and start working.
During the Windows Vista Driver Auto Setup Procedure, users should use one of
the following two methods to install the driver after the system restart.
Method 1. Run Reboot Setup
Windows Vista will block startup programs by default when installing drivers
after the system restart. You must select taskbar icon
Run Blocked Program
and run
Reboot Setup
to install the next driver, until you finish all drivers
installation.
Method 2. Disable UAC (User Account Control)
* For administrator account only. Standard user account can only use Method 1.
Disable Vista UAC function before installing drivers, then use CD driver to install
drivers, it will continue to install drivers after system restart without running blocked
programs.
