32
Motherboard User’s Guide
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized defaults
or not. You select [OK], and then <Enter>, the Setup Utility loads all default values;
or select [Cancel], and then <Enter>, the Setup Utility does not load default values.
Note
: It is highly recommend that users enter this option to load optimal default
values for accessing the best performance.
Supervisor Password Page
This page helps you set up some parameters for the hardware monitoring
function of this motherboard.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
Supervisor Password : Not Installed
Change Supervisor Password
Installed or Change the
password.
Press Enter
Press <Esc> to return to the main menu setting page.
Auto Detect DIMM/PCI Clk
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI
slots.
Spread Spectrum
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Mag-
netic Interference) generated by the system.
Change Supervisor Password
You can select this option and press<Enter> to access the sub menu. You can use
the sub menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Supervisor Password
This item indicates whether a supervisor password has been set. If the password
has been installed , Installed displays. If not, Not Installed dispalys.
