27
Chapter 3: BIOS Setup Utility
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Help Item
Integrated Peripherals Page
OnBoard IDE Controller
Onboard SATA Controller
Use this item to enable or disable the onboard IDE interface.
This item allows you to enable or disable the onboard SATA controller.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
Onboard IDE Controller
Enabled
OnBoard SATA Controller
Enhanced
Onboard LAN Function
Enabled
Onboard LAN Boot ROM
Disabled
Onboard AUDIO Function
Enabled
Serial Port1 Address
3F8/IRQ4
Parallel Port Address
378
Parallel Port Mode
ECP
ECP Mode DMA Channel
DMA3
Parallel Port IRQ
IRQ7
USB Functions
Enabled
Legacy USB Support
Enabled
DISABLED: disables the
integrated IDE
Controller.
ENABLED: enables both
Controllers.
Onboard LAN Function
Use this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Onboard AUDIO Function
Use this item to enable or disable the onboard audio device.
Serial Port1 Address
Use this item to enable or disable the onboard COM1 serial port, and to assign a
port address.
Parallel Port Address
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.
Parallel Port Mode
Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).
ECP Mode DMA Channel
Use this item to assign the DMA Channel under ECP Mode function.
