22
Motherboard User’s Guide
Standard CMOS Setup Page
This page displays a table of items defining basic information of your system.
These items set up system date and time.
Primary IDE Master/Primary IDE Slave
Use these items to configure devices connected to the Primary IDE channels. To
configure an IDE hard disk drive, choose
Auto
. If the
Auto
setting fails to find a hard
disk drive, set it to
User
, and then fill in the hard disk characteristics (Size, Cyls,
etc.) manually. If you have a CD-ROM drive, select the setting
CDROM
. If you
have an ATAPI device with removable media (e.g. a ZIP drive or an LS-120), select
Floptical
.
If you have already changed the setup utility, press
F10
to save those changes and
exit the utility. Press
F1
to display a screen describing all key functions. Press
F9
to load optimal settings.
SATA1/2
Date & Time
These items display the status of auto detection of sata devices when “Onboard
SATA-IDE” sets to “IDE”.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Standard CMOS Setup
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Date
Wed 12/24/2008
Time
00 : 02 : 00
Primary IDE Master
Not Detected
Primary IDE Slave
Not Detected
SATA1
Not Detected
SATA2
Not Detected
IDE BusMaster
Enabled
Some options on the main menu page lead to tables of items with installed values
that you can use cursor arrow keys to highlight one item, and press
PgUp
and
PgDn
keys to cycle through alternative values of that item. The other options on the main
menu page lead to dialog boxes requiring your answer OK or Cancel by selecting the
[OK]
or
[Cancel]
key.
