PC Chips M825G Series, Руководство пользователя

Страница: 29 / 52

11
Jumper JP2: Clear CMOS Memory
This jumper can clear the CMOS memory. You may need to clear
the CMOS memory if the settings in the Setup Utility are incorrect
that your motherboard can’t operate. To clear the CMOS memory,
disconnect all the power cables, and then move the jumper cap into
the CLEAR setting for a few seconds.
Function Jumper Setting
Normal Short Pins 1-2
Clear CMOS Short Pins 2-3
Jumper JP3/JP4: CPU Clock Selector
These two 3-pin jumpers select the processor 166 MHz, 133 MHz
or 100 MHz.
CPU CLK JP3 JP4
100 MHz Short Pins 1-2 Short Pins 1-2
133 MHz Short Pins 2-3 Short Pins 1-2
166 MHz Short Pins 2-3 Short Pins 2-3
Installing The Motherboard
Install the motherboard in a system chassis (case). The board is a
Micro ATX size motherboard. You can install this motherboard in
an ATX case. Ensure your case has an I/O cover plate that matches
the ports on this motherboard.
Install the motherboard in a case. Follow the case manufacturer’s
instructions to use hardware and internal mounting points on the
chassis.
ATX1
SYSFAN1
1
PANEL1
1
CPUPW1