PC Chips M825G Series, Руководство пользователя

Страница: 31 / 52

13
AUDIO2: Front Panel Audio Header
This header allows the user to install auxiliary front-oriented
microphone and line-out ports for easier access.
Pin Signal Pin Signal
1 AUD_MIC 2 AUD_GND
3 AUD_MIC_BIAS 4 AUD_VCC
5 AUD_FPOUT_R 6 AUD_RET_R
7 HP_ON
8 KEY
9 AUD_FPOUT_L 10 AUD_RET_L
Note : If you want to connect the front panel sound jack, you
have to remove jumper caps of Pin(5-6) and Pin(9-10)
from the AUDIO2 header.
USB3: Front panel USB Header
The motherboard has USB ports installed on the rear edge I/O port
array. Additionally, some computer cases have USB ports at the
front of the case. If you have this kind of case, use auxiliary USB
connector USB3 to connect the front-mounted ports to the
motherboard.
Pin Signal Pin Signal
1 VERG_FP_USBPWR0 2 VERG_FP_USBPWR0
3 USB_FP_P0(-) 4 USB_FP_P1(-)
5 USB) 6 USB)
7 GROUND 8 GROUND
9 KEY 10 NC
1. Locate the USB3 header on the motherboard.
2. Plug the bracket cable onto the USB3 header.
3. Remove a slot cover from one of the expansion slots on the
system chassis. Install an extension bracket in the opening.
Secure the extension bracket to the chassis with a screw.