27
Chapter 3: BIOS Setup Utility
Voltage Value
This item identifies the CPU default voltage value. The value may change
depending on the CPU you installed on the motherboard.
Hardware Monitor Page
This page sets up some parameters for the hardware monitoring function of this
motherboard.
CPU/System Temperature
These items display CPU and system temperature measurement.
FANs & Voltage Measurements
These items indicate cooling fan speeds in RPM and the various system voltage
measurements.
Load Optimal Defaults
This option opens a dialog box to ask if you are sure to install optimized
defaults or not. You select [OK], and then <Enter>, the Setup Utility loads all
default values; or select [Cancel], and then <Enter>, the Setup Utility does not
load default values.
Save Changes and Exit
Highlight this item and press <Enter> to save the changes that you have made in
the Setup Utility configuration. When the Save Changes and Exit dialog box
appears, select [OK] to save and exit, or [Cancel] to return to the main menu.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Hardware Monitor Setup
*** System Hardware Monitor***
Vcore
:1.463V
+1.2VLDT
:1.248V
Vdimm
:2.512V
+5V
:5.026V
+12V
:12.056V
+5VSB
:4.961V
CPU FAN2 Speed
:4017 RPM
SYSTEM FAN1 Speed
:0 RPM
CPU
Temperature
:50°C/122°F
SYSTEM
Temperature
:31°C/87°F
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
