24
Motherboard User’s Guide
Power Management
Use this item to enable or disable a power management scheme. If you enable
power management, you can use the items below to set the power management
operation. Both APM and ACPI are supported.
Suspend Mode
This item selects the status S1(Stop Clock) or S3(Suspend to RAM) when the
system enters the power-saving Suspend mode.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend
mode.
Resume On RTC Alarm / RTC Alarm Date (Days) / System Time
The system can be turned off with a software command. If you enable this item,
the system can automatically resume at a fixed time based on the system’s RTC
(realtime clock). Use the items below this one to set the date and time of the
wake-up alarm. You must use an ATX power supply in order to use this feature.
LAN/Ring Power On
The system can be turned off with a software command. If you enable this item,
the system can automatically resume if there is an incoming call on the Modem,
or traffic on the network adapter. You must use an ATX power supply in order
to use this feature.
Keyboard Power On
If you enable this item, system can automatically resume by pressing any keys
or Power key on the keyboard, or typing in the password. You must enable the
Keyboard Power On jumper and use an ATX power supply in order to use this
feature.
Wake-Up Key
When Keyboard Power On is set to “Wake-Up Key”, this item is available and
users can press any keys on the keyboard.
