9
Before and During Operation
Operating Instructions
1. Before operation it is important to give the sprayer unit
a thorough inspection, which covers the hoses, wiring
harness, and other sprayer components. Ensure that the
suction strainer and the tank are rinsed out.
2. Before using any chemical or product ensure that it is not
a petroleum-based product or a non-compatible chemical
for the pump.
3. Fill the sprayer tank with the proper amount of water and
chemicals as instructed by the chemical manufacturer.
4. Connect the wiring harness to an approved power source
as directed in the “Mounting the Sprayer” section (Page
8). Turn the control switch (b) (Figure 5, Page 8) to the
ON position and allow the pump to run until it reaches its
maximum pressure. The pump will automatically turn off
when its maximum pressure is reached. The pump does
not need to be manually turned off with the control switch.
Before operating the sprayer, it is important that you read this entire manual and know all safety precautions. Always take your time
and be alert when operating the sprayer in order to avoid an accident.
5. When you are ready to spray, point the gun in the desired direction and squeeze the trigger on the spray gun. The pump will
automatically start when the spray gun is engaged.
6. The spray gun’s liquid flow can be adjusted by turning the spray tip (a) at the end of the spray gun wand. The spray gun’s trigger
can also be locked in the “on” position by sliding the plastic tab (b) on the top of the trigger towards yourself (Figure 6).
Following Operation
1. IMPORTANT: Thoroughly rinse the sprayer of any chemical residue after spraying It is recommended to fill the tank with fresh
water and engage the spray gun until the system is entirely free of chemical residue. WARNING: Do not to rinse the sprayer in
an area where humans, animals, or sensitive plants could come in contact with chemical residue.
2. Store the sprayer in a location where it will be away from human or animal activity. Do not allow children to play on or near the
sprayer.
IMPORTANT: Using a petroleum-based product or a non-compatible chemical will void the manufacturer’s warranty. Contact
the original retailer if you are unsure as to whether or not a chemical or substance is acceptable for the pump.
a
b
Figure 6: Spray gun
