ООО «ТЛК Трейд» | 196158, г.Санкт-Петербург, Пулковское шоссе, д.30, корп.4, оф. 213В (юр.) | ИНН 7810592830 КПП 781001001
р/с 40702810068000007550 | к/с 30101810200000000704 | Филиал ОПЕРУ ОАО Банк ВТБ в Санкт-Петербурге | БИК 044030704
ОКПО 66035862 | ОКАТО 40284565000 | ОГРН 1107847196060 | т.(812)6499888 | http://www.tlct.ru http://www.rftel.ru
ООО «ТЛК Трейд», Санкт-Петербург
+7 812 64 99 888
Encoder1 / Encoder2 / Encoder3 / Encoder4 / Remux / IP In / ASI Input
7.3 MUX
In the “MUX” page, select the program(s) that to be remultiplexed and configure the necessary parameters
for the new generated transport stream.
Packet Size:
188 Byte / 204 Byte
Bit Rate (Kbps):
Set the bitrate for the new generated MPTS, valid range from 100~216000 Kb/s. The bitrate should be at
least bigger than the total bitrate of selected programs, otherwise, packets may dropout.
TS ID:
Set the TSID of the new generated transport stream, valid range from 0 to 65535 decimal
Insert EIT:
ON: insert EIT into the output stream, EIT data may come from ASI or IP input port
OFF: EIT will not be inserted into the output stream.
Remove CA:
ON: remove the CA descriptors that are carried within the inputted TS over ASI or IP
OFF: keep the CA descriptors