ООО «ТЛК Трейд» | 196158, г.Санкт-Петербург, Пулковское шоссе, д.30, корп.4, оф. 213В (юр.) | ИНН 7810592830 КПП 781001001
р/с 40702810068000007550 | к/с 30101810200000000704 | Филиал ОПЕРУ ОАО Банк ВТБ в Санкт-Петербурге | БИК 044030704
ОКПО 66035862 | ОКАТО 40284565000 | ОГРН 1107847196060 | т.(812)6499888 | http://www.tlct.ru http://www.rftel.ru
ООО «ТЛК Трейд», Санкт-Петербург
+7 812 64 99 888
Spare: always output from the backup RF input
RF Out Restore
(the submenu displays
only when Auto mode
is selected.)
Spare to Main: switch to Main source (the built-in modulator)
Main to Spare: switch to Backup RF source
6.2.9 Configuration – ASI Output
Submenu
Parameters
& Description
Default Value
ASI Output
ASI Output Source: select the source for ASI output
Encoder1 / Encoder2 / Encoder3 / Encoder4 / Remux / IP In /
ASI Input
Remux
6.3 System
IP Address: set the IP address of the device, valid range from
0.0.0.0~255.255.255.255
IP Address: 10.10.70.48
Subnet Mask: set the net mask of the device, valid range from
0.0.0.0~ 255.255.255.255
Net Mask: 255.255.255.0
Gateway: set the gateway of the device, valid range from
0.0.0.0~255.255.255.255
Gateway: 10.10.70.1
Network Setting
MAC Address: to display the MAC address
Remote Setting
Trap IP Address: set the IP address of the SNMP Trap
server, valid range from 0.0.0.0~255.255.255.255
Trap IP Address:
10.10.70.25
Product Name
Edit Product name: user allows to rename the device, press
Enter and key in the name of the device, then press Enter to
confirm the setting or press Exit to cancel.
Software Version
Software Version: display the software version
Factory Default
Factory Default:
Enter = Yes: press Enter to recall the factory default settings.
Exit = No: press Exit to cancel
Note: the IP address of the
device is not reset to the
factory setting!
MAC Address: to Modify the MAC address
S/N: display the serial number of the device
Gigabit MAC Address: to Modify the Gigabit MAC address
Machine Type
(Reserved for factory
setup)
Detail Version: Display the detail version of
MCU,FPGA,LINUX OS
WEB Login ID
Edit Login ID: press Enter and key in the login ID for WEB
management
Default Login ID: root
