ООО «ТЛК Трейд» | 196158, г.Санкт-Петербург, Пулковское шоссе, д.30, корп.4, оф. 213В (юр.) | ИНН 7810592830 КПП 781001001
р/с 40702810068000007550 | к/с 30101810200000000704 | Филиал ОПЕРУ ОАО Банк ВТБ в Санкт-Петербурге | БИК 044030704
ОКПО 66035862 | ОКАТО 40284565000 | ОГРН 1107847196060 | т.(812)6499888 | http://www.tlct.ru http://www.rftel.ru
ООО «ТЛК Трейд», Санкт-Петербург
+7 812 64 99 888
6.2.3 Config – Remux
Submenu
Parameters
& Description
Default Value
Program List
Program List: select the programs to remux. Click on Enter to
select, double click to cancel. (The program(s) will be marked
with an asterisk (*) once be selected)
Encoder 1: select the program from encoder 1
Encoder 2: select the program from encoder 2
Encoder 3: select the program from encoder 3
Encoder 4: select the program from encoder 4
ASI Input: select the program(s) inputted via ASI input port.
IP Input: select the program(s) inputted via IP input port.
(Note: this submenu is displayed only when the IP I/O is
configured as full-duplex mode.)
Bit Rate
Output Bit Rate: key in the bit rate of the new generated
MPTS, valid range from 100~216000 Kb/s
Output Bit Rate:
38015Kb/s
Packet Size
188 Byte / 204 Byte
188 Byte
TS ID
TS ID: key in the TSID of the new generated transport stream,
valid range from 0 to 65535 decimal
TS ID:00008
Remove CA
ON: remove the CA descriptors that are carried within the
inputted TS over ASI or IP
OFF: keep the CA descriptors
OFF
Insert EIT
ON: insert EIT into the output stream, EIT data may come
from ASI or IP input port
OFF: do not insert EIT into the output stream.
OFF
Output Program
Display the selected program names
6.2.4 Config – TS/IP (Multiple Output Mode)
Submenu
Parameters
& Description
Default Value
Mux/ASI Out: set the source for the IP output (This menu is
only valid for IP Channel 5)
Mux/ASI Out: Mux
Uni/Multi IP Address: set the destination IP address for the
IP output
Uni/Multi IP Address:
238.069.070.001
Uni/Multi UDP Port: set the destination port number, valid
range from 1~65535
Uni/Multi UDP Port:
01234
Channel 1~4
(the streaming comes
from Encoder 1~4
correspondingly.)
Channel 5
(the streaming comes
from ASI input.)
Target MAC Address:
set the destination port number MAC Address
Target MAC Address:
00:00:24:56:12:67
