Charging the battery
Before using The PATmicro for the first time you will need to fully charge the battery.
Plug the supplied charging cable into the charging socket and the USB plug into your
PC or laptop or a USB wall/car charger.
The LED on the USB charger cable will illuminate red whilst charging and change to
green when battery is fully charged.
To fully charge the battery from discharge will take approx 4-5 hours depending on
battery condition.
It is better, but not essential, to power off The PATmicro before and during charging.
PawTrax recommends, that to ensure maximum capacity, keep charging for 4 hours
at least even though the LED indicator may have changed to green after a couple of
hours.
We also recommend completely charging and discharging for a few times when using
for the first time.
Inserting SIM Card
This device will not work without a SIM card. The SIM card must also be activated.
This can be done either at place of purchase or as per instructions from SIM card
provider. This usually involves putting the SIM in a mobile phone and making a
single call.
You should ensure that the device is powered off before inserting the SIM card. Open
the rubber cover on the side and slide the SIM card into the SIM Card slot beneath
the USB slot.
Slide SIM card into the slot in the direction shown