Preparing Shock Clock for Use
Charging:
Charge the module through the Micro-USB port on
the side of the module using the included USB cord.
Plug one end into the Shock Clock, and the other
into a computer’s USB port or USB wall charger.
Shock Clock will pulse red when charging and turn
solid yellow when fully charged.
Inserting / Removing The Module:
To insert the module into the wristband, make sure
that the lightning bolt lines up with the lightning bolt
in the band, and press firmly into the band until the
module fits securely. To remove the module, push
down on the edges of the wristband face.
Button Info:
The lightning bolt is a button used to either
Snooze
(1 press)
or
Turn off (hold for 5 seconds)
the alarm.
The snooze will last for 5 minutes before alerting you
to wake up again with your chosen stimulus.
Please
note that while the Shock Clock is in snooze
mode, it will blink red every 15 seconds.
