background image

LIMITED WARRANTY

Paulin Products, Inc., as Manufacturer, warrants its indoor gaslights to the ORIGINAL
PURCHASER only and only to the extend and conditions below:

1.  For a period of the earlier of thirty (30) days after purchase or one (1) year after date of
manufacture (date is metal stamped on Wall Plate), at Manufacturer’s option, will repair or
replace any parts EXCEPT glass parts, gaskets, or mantles found under normal use to be
defective in factory materials or workmanship.

2.  This warranty will apply and the repair or replacement will be made without charge, only if:

a. The unit is used in an unaltered form and assembly and only indoors and only for

              appropriate illumination purposes.

b. The unit is used with propane gas (model 9 or 9T) or butane gas (model 9B or 9BT)
    only in a well ventilated area.
c.  The unit shall not have been installed or serviced by anyone other than by a
    qualified gas service personnel.
d.  The unit shall have been installed, operated and maintained in accordance with
     the instructions and purchaser shall have read and heeded the warnings
     regarding use.
e.  The unit shall be shipped (less globe) to Paulin Products, Inc. at the address below,
     freight prepaid, accompanied by a letter stating service or repairs desired.
     Be sure to give full information, including date and place of purchase, full name
     and address.

3.  Manufacturer reserves the right to, and at its option may, refund the purchase price in full
satisfaction of any warranty obligations hereunder.

4.  Manufacturer shall not be liable for incidental or consequential damages and in all events
its liability hereunder shall not exceed the purchase price of the unit.
5.  MANUFACTURER DISCLAIMS ANY OTHER WARRANTY AND THIS WARRANTY IS
EXPRESSLY GIVEN IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND
INCLUDING BUT NOT LIMITED TO THAT OF MERCHANTABILITY, ANY WARRANTY
WHICH MAY BE IMPLIED BY LAW SHALL BE LIMITED IN TIME TO THE DURATION OF
THIS WRITTEN WARRANTY.

6.  Manufacturer neither authorizes nor assumes responsibility for any other affirmation of fact,
description or representation with respect to its products.  Manufacturer neither assumes nor
authorizes any person to assume any obligation or liability with regard to its products except as
expressly set forth herein.

Note: Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.  This warranty gives you specific legal rights which may
vary from state to state.

PAULIN PRODUCTS, Inc.

  

Sales Office: 36 South Franklin Street  •  Chagrin Falls, OH 44022  •  440-247-0828  •  FAX: 440-247-7443

 www.paulinproducts.com

Содержание Model 9









Отзывы: