Patton SmartNode 5541 Series Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 59

background image

Installing the SmartNode device

29

SmartNode 5541 & 4141 Series User Manual

3

• SmartNode Installation

Connecting cables

Connect the cables in the following order:

1.

If your SmartNode device is equipped with a surge protector go to section

“Installing a grounding wire on

the SmartNode device’s ground lug”

) to install the ground wire. Otherwise, go to step 2.

Note

SmartNode devices that include surge protection have

/SP

in their model

code. All SmartNode /SP models provide a secondary protection against
over-voltage and over-current conditions (surges) including lightning strikes
and power cross.

2.

Installing the RJ-11 voice port (FXS) cable or cables (see section

“Installing an interface cable on the

SmartNode device’s FXS interface ports”

)

Note

SmartNode devices that include surge protection have

/SP

in their model

code. All SmartNode /SP models provide a secondary protection against
over-voltage and over-current conditions (surges) including lightning strikes
and power cross.

For phone lines that go across buildings (TNV-3), a SmartNode /SP device (which
includes K.21-compliant surge protection) is required.

For SmartNode models without surge protection, only TNV-2 circuits are allowed
to be connected inside buildings.

3.

Connect the 10/100/1000Base-T Ethernet LAN and WAN (see section

“Connecting the 10/100/

1000Base-T Ethernet LAN and WAN cables”

4.

Connect the power mains cable (see section

“Connecting the power supply”

Do not work on the system or connect or disconnect
cables during periods of lightning activity.

The Interconnecting cables shall be acceptable for external
use and shall be rated for the proper application with
respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.

WARNING

WARNING

«
...
27
28
29
30
31
...
»

Содержание SmartNode 5541 Series




























































Отзывы:

Нет отзывов

Похожие инструкции для SmartNode 5541 Series

Бренд: ProSoft Technology Страницы: 154

Бренд: IFM Страницы: 131

Бренд: ABB Страницы: 111

Бренд: ABB Страницы: 72

MicroSCADA Pro SYS 600C

Бренд: ABB Страницы: 42

Ability ATT-VZN SIM card ready gateway

Бренд: ABB Страницы: 16

Бренд: ABB Страницы: 41

Бренд: ABB Страницы: 280

Бренд: ABB Страницы: 16

Бренд: Plugwise Страницы: 16

Бренд: Telos Страницы: 258

Бренд: Media Страницы: 8

MiBoxer ZB-Box2

Бренд: Mi-Light Страницы: 6

Бренд: ZyXEL Communications Страницы: 2

Бренд: ZyXEL Communications Страницы: 224

Бренд: iiNet Страницы: 65

Бренд: Opticon Страницы: 27

Бренд: OBLO Living Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды